Product Description
Decanter centrifuge from Reyes Separator provide exceptional performance whenseparating solids from liquids, and make it possible to do so continuously,efficiently and controllably.
Reyes decanter centrifuges are designed to handle a wide range ofsolid particles with diameters from 5 mm to a few microns.
Decanter centrifuge can also handle slurries with a solid content from as low as 0.1% w/w to more than 65% w/w.
The feed suspension is introduced through an inlet pipe into the feed zone of the conveyor where it is accelerated and directed into the interior of the bowl. The settled solids are conveyed axially towards the small end of the bowl by means of the screw conveyor, which rotates at a slightly different speed than the bowl. On the way to the discharge ports the solids are lifted out of the pond up along the dry beach. The solids are finally discharged from the bowl through the discharge ports into the collecting chamber of the casing that surrounds the bowl. From there the solids are removed by gravity through the outlet funnel. The liquid phase forming a hollow cylinder due to the centrifugal force, and flows towards the large end of the bowl. There the liquid overflows adjustable plate dams into the centrate chamber of the casing and is discharged by gravity.
Working Principle
Decanter centrifuge used for solid-liquid separation of heterogeneous phase, which can separate liquid-solid and liquid-liquid-solid suspensions. When the material enters the high-speed rotating drum, due to different sizes of centrifugalforce, the solid particles in the suspension are affected by large centrifugal force and settle to the inner wall of the drum.The clear (liquid) phase in the suspension is affected by relatively small centrifugal force and settles to the inner side of the solid material. The screw conveyor with the same rotation direction as the drum is also rotating at high speed.A stable speed difference is generated by the differential. The solid particles settled on the inner wall of the drum are transported to the solid outlet of the drum by the screw conveyor, and the phase cleaning liquid flows out of the phase cleaning outlet of the drum.
Product Presentation
The parameters of separation performance
|
|
2-Phase Decanter centrifuge
|
|
|
SS304/Duplex
|
|
|
450mm
|
|
|
380v/customized
|
|
|
2700 r/min
|
|
Separator factor
|
2913g
|
|
|
4-25 m3/h
|
| Weight |
2500 kgs |
| Product Dimension |
3320x1700x1130mm |
| HS Code |
8421192000 |
Mainly Application
1. Separating and dewatering the industrial and domestic water.
2. Wash, classification and dewatering for amylum.
3. Dewatering for soybean, wheat.
4. Dewatering for fish powder, fish meat.
5. Dewatering for lees.
6. Clarification for juice and dewatering for fruits.
7. Separation and purification for animal and vegetable oil.
8. Separation and purification for coal tar.
9. Classification and dewatering for kaolin and graphite.
10. Classification and dewatering for dyestuff and pigment.
11. Float wash of extractive coal and dewatering of coal mud.
12. Classification and dewatering for ore slurry.
Main Features
dewatering with continous feeding and discharging
1. the drum and scroll conveyor are made of stainless steel resisting corrosion
2. the scroll conveyor was coated with wearable alloy or welded with alloy plate(optional)
3. stepless speed regulation for the bowl
4. step or stepless speed regulation for scroll's differential speed.
5. Safety protection: rotation rate detection over, vibration protection, motor overload and overheat protection, protection for
scroll when zero differential speed occurs
6. For the highly sticky materials, it can add the hydraulic differential gear to stabilize.
Best Service For You
1) 7day*24hours Hot-line & Email Service.
2) Your inquiry related to our products or prices will be replied in 24hours.
3) Well-trained and experienced staffs to answer all your questions in fluent English.
4) Abundant spare parts in stock are available to provide.
5) Our technicians could be dispatched for overseas service.
6) Your workers could get trained in our factory.
Service Commitment
1. We will provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
2. Consultant services for whole machine life, 24 hours technical support by email and telephone.
3. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
Drum
The drum is cast by Duplex 304 stainless steel in centrifugal casting, the forging process is adopted , which can enhance its corrosion resistance, The replaceable alloy sleeve is installed in the solid state outlet, so that the mother material of the drum's outlet is not worn, and the wear-resistant bar is installed in the drum to make the drum inside not worn.
Differential
The differential drives the screw discharger and makes it rotate at a constant speed of the external drum. The speed difference between the external drum and the screw discharger is determined by the reduction ratio of the differentialand the speed of the external drum.
PLC Control Panel
The electrical control adopts the double conversion auto control system, which can display the parameters such as frequency, rotation speed, differential speed and current of operating major and auxiliary electrical engine.
Eletrical Components: SIEMENS/S-chneider/ABB
Cemented carbide and wear sleeve
Certificate
Company Profile
Jinhua Shenzhou Centrifuge has been developing and manufacturing centrifuges for more than 40 years, and is one of the Chinese leading manufacturer. Shenzhou Centrifuge has more experience and expertise than any other separator manufacturer when it comes to applying and using decanter centrifuge for the purpose of continuous separation.
Main production: LW series decanter centrifuge, SZ series sludge dewatering press, LWS three-phase centrifuge, centrifugal dehydrator, integrated sludge thickening and dewatering machine.
The company has a quality assurance system and after-sales service assurance system. It is a technical enterprise integrating scientific research, design, manufacturing, sales and service.
At present, the equipment is exported to 70 countries, including the United States, Canada, Australia, Russia, Brazil and Singapore.
Packing&Shipping
FAQ
Q1: Where can I get product & price information?
A1: Send us inquiry or email directly, then we will contact you.
Q2: How can I make sure your machinery is suitable for me?
A2: Please tell all the separation information you know, such as your raw liquid, two-phase or three-phase separation, solid content in liquid, solid size, the purpose, etc. After analyzing your information, we will to choose a suitable model for you, and send the details and videos to you.
Q3: What should I do if I want to see the separation effect?
A3: If you can come to our factory with the raw liquid, we will provide test service. Or you deliver the raw liquid to us, and we will do a test, and supply you the testing videos.
Q4: How to enjoy the OEM services?
A4: As the manufacturer of the machine, we will try our best to satisfy you if you have any specific requirement, such as the cover device, drum size, motor voltage, etc.
Audited Supplier 
The feed suspension is introduced through an inlet pipe into the feed zone of the conveyor where it is accelerated and directed into the interior of the bowl. The settled solids are conveyed axially towards the small end of the bowl by means of the screw conveyor, which rotates at a slightly different speed than the bowl. On the way to the discharge ports the solids are lifted out of the pond up along the dry beach. The solids are finally discharged from the bowl through the discharge ports into the collecting chamber of the casing that surrounds the bowl. From there the solids are removed by gravity through the outlet funnel. The liquid phase forming a hollow cylinder due to the centrifugal force, and flows towards the large end of the bowl. There the liquid overflows adjustable plate dams into the centrate chamber of the casing and is discharged by gravity.
){kind=link}