Horizontal 3 Phase Decanter Waste Water Treatment Centrifuge Oilfield Equipment

• Customization: Available
• After-sales Service: Online Support
• Warranty: 1 Year
• Type: Centrifuge
• Object: Cosmetic
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Condition: New
• Product Type: Separation Equipment
• Electrical Control Cabinet: PLC Display Screen
• Drum Diameter (mm): 250-750
• Differential Max Torque (Nm): 1500-20000
• Key Selling Points: Long Service Life
• Voltage: 220V/380V/460V/480V
• Speed (Rpm): 2200-4500
• Material: 304/316L Stainless Steel
• Main Motor Power (Kw): 11-160
• Weight: 6500
• Dimension(L*W*H): 5520*1450*1700
• Length-Diameter Ratio (mm): 3.7-4.1
• Applicable Industries: Water Treatment
• Product Name: 3phase Water Treatment
• Power: 50Hz/60Hz
• Trademark: SENZ
• Origin: Zhejiang, China

Product Description

Horizontal  3 phase decanter waste water treatment centrifuge

Product Description

Welcome to SENZ!

Sludge concentration and dewatering integrated system flow chart

 

I. Details of water treatment field

The dehydration system is widely used for oxidation ditch, AB, A/O, A2/O, SBR, MBR, anaerobic fermentation, and other processes, as well as urban domestic sewage, municipal sewage, landfill leachate, urban tap water, purified water, and some industrial wastewater of conventional sewage treatment processes. Solid-liquid separation is achieved by a high-performance D\E type two-phase high-efficiency centrifuge.

 

II. Centrifuge characteristics 

 

1.Unparalleled equipment investment costs and later-stage operation costs
2.Extremely low infrastructure investment and good on-site 3.operating environment
4.Diversified models, wide selection range, and complete engineering project
5.Modular design, easy to operate
6.Operator configuration and labor intensity

 

III. Technical characteristics of the centrifuge

 

1.Not only equipment manufacturer but also system engineering service provider
2.Eddy current type spiral outlet
3.BD board technology
4.More economical in equipment investment and later-stage operation
5.High performance wear-and corrosion-resistant cemented carbide

 

*Three-phase centrifuge model and technical parameters

Outlet position local

1.CIP washing system
The fully automatic control system is equipped with a CIP washing system, which can effectively solve the problem that it is not completely cleaned during the shutdown process and effectively avoid the equipment troubles caused by artificial factors.
2.Humanized centrifuge configuration
a.Spiral bearing (in the drum, concealed) lubrication technology: the lubricant is filled from the outside of the hood.
b.The hood adopts a hinged opening structure and is equipped with a high-pressure gas strut to assist the opening.
3.Variable pitch technology
4.High rigidity screw rotor technology

 

Alloy wear plate

 

1.Double-motor double-frequency conversion common DC bus
Through the double-motor double-frequency conversion control technology, the stepless adjustment of the centrifuge differential speed can be realized. It features fast reaction speed, accurate torque detection, stable torque control, and low failure rate.
2.Constant torque control technology
The centrifuge can achieve continuous, stable, and economic operation.

 

Double-motor double-frequency

 

 

IV. Two-phase centrifuge model and technical parameters

Item		Centrifuge model
		LW250× 1025E		LW350× 1435E	LW450× 1845E	LW520× 2150E	LW580× 2400E	LW650× 2600E	LW750× 2800E
m3/h	Solid content	0.8-1%	5-8	10-15	35-40	60-70	70-80	80-90	90-100
Throughput m3/h	SS(W/W)
		1-2%	3-5	8-10	30-35	40-60	60-70	70-80	80-90
		2-4%	2-3	5-8	15-30	20-40	30-60	40-70	50-80
		4-5%	2	4-5	10-15	15-20	25-30	30-40	40-50
Drum diameter (mm)			250	350	450	520	580	650	750
Length-diameter ratio (mm)			4.1	4.1	4.1	4.1	4.1	4.1	3.7
Speed (rpm)			4500	3500	3200	3000	2800	2600	2200
Designed separation factor			2835	2435	2580	2620	2546	2460	2033
(Differential speed (rpm)			1-50	1-35	1-34	1-34	1-30	1-28	1-28
Differential maximum torque (Nm)			1500	2500	5000	8000	12000	16000	20000
Main motor power (kW)			11	15 -22	30-37	55-75	75-90	90-110	110 -160
Ancillary motor power (kW)			4	5.5	7.5-11	11-15	15-18.5	22	30
Total length (mm)			2500	3700	4300	5100	5520	6250	6500
Width (mm)			800	1050	1150	1250	1450	2000	2200
Height (mm)			1150	1200	1450	1600	1700	1550	1600
Total weight (kg)			1250	2500	4200	5200	6500	7800	11000

 

The length dimension varies with motor power.
1.Suspension type shaftless spiral structure minimizes the contact area between the spiral and the wear-resistant lining, improving the service life and operating energy consumption.
2.The upper open U-tube structure effectively solves mud cake blocking. Lined with a polyurethane sheet, it can avoid U-tube wear.
3. The spiral blades made of high-strength steel via cold rotation can effectively avoid spiral stretching caused by tilting installation.

Product Categories

Send Inquiry Here to Get a Free Server!

Application

Our Advantage

 

Put Your Good Idea into Reality and Click "Contact Us"

Company Profile

Packaging & Shipping

FAQ

1. Are you a manufacturer or a trading company?

We are manufacturer in China.We specialize in manufacturing separation control equipment over 20 years.

 

2. How long is the warranty of your products?

The warranty is 12 months after install at site or 14 months after machine leaving factory. Our machine service life is more than 10 years as USA quality.

 

3. What kind of service u can provide?

We can give 24hrs online services and 1hurs fast feedback