China Decanter Centrifugal Equipment Factory New Horizontal Sludge Dewatering Separator

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Model NO.: LWS355
• Object: Cosmetic
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Condition: New
• Separation: 2phase Separation
• Operation: Easy Operation
• Feature: High Efficiency
• Warranty of Core Components: More Than 5 Years
• Name: Decanter Centrifuge
• Bearing: S-Kf Bearing
• Key Selling Points: Famous Brand PLC
• Discharge Type: Self-Cleaning
• Structure: Stable Structure
• Machinery Test Report: Provided
• Motor: ABB
• Weight: 1050
• Bowl Material: Stainless Steel 304/316L/Duplex Steel
• Application: Oil Extraction
• Transport Package: Wooden Case
• Specification: 247X135X83
• Trademark: Shenzhou
• Origin: Zhejiang, China

Product Description

Product Description

China Decanter Centrifugal Equipment Factory New Horizontal Sludge Dewatering Separator
 

The purpose of separation is to separate out substances with different mass ratios from mixed fluid.Separation forms included solid-liquid separation,liquid-liquid separation and liquid-liquid-solid separation.

When mixed fluid enters rotating bowl of centrifuge through feed tube ,solids with larger density would rapidly deposit on inner wall of the bowl,forced by centrifugal acceleration.Then spiral pusher pushed deposited solids to taper end of the bowl,and discharges them out of centrifuge from residual outlet.Meanwhile ,liquid phase with smaller density forms a liquid ring layer and discharges from bowl through overflow port,the bowl and spiral pusher run at a high speed simultaneously ,for there exists speed discrepancy,deposited solids on the wall of bowl could be conveyed to residue outlet by spiral pusher.This separation process carry out continuously.

 

The 3-phase decanter separates which contains oil into an oil phase, solids and virtually oilfree waste water. Because of its high dry matter, the solids can be recycled relatively easily.

In addition, the solids concentration in the waste water is lower than would be the case if nozzle separators are used in
conventional process.

 

 

Decanter centrifuges process characteristics

The separation process in a decanter centrifuge relies on a few process characteristics such as centrifugal force or G-force, sedimentation rate and separating factor, differential speed between the conveyor and bowl, and clarity of the liquid discharge.Decanter centrifuges require a centrifugal force for the separation of the solids from the liquid. This characteristic is dependent on the radius of the centrifuge and its angular rotational speed. A decanter centrifuge applies a force equivalent to several thousand G's, which reduces the settling time of the particles. It is also favored to maintain a large G-force, which will result in an improved separation.
The rate at which sedimentation occurs is an important characteristic of the decanter centrifuge separation process.

Thesedimentation rate is influenced by the particle size, the shapes of the particles, their differential densities and the viscosity between the particles and the liquid. This process characteristic can be improved by utilizing flocculating agents. The sedimentation rate is also dependent on the separating factor of the decanter centrifuge, which is related to the centrifugal force.

The exterior bowl and the scroll conveyor rotate at different high speeds. This differential speed between the two is accountable for the sedimentation throughout the decanter centrifuge cylinder. A high differential speed results in a smaller residence time of the cake settlement, so it is necessary to keep the cake thickness to a minimum to avoid impairing the discharge quality.

Keeping the cake thickness to a minimum also aids in the improvement of the cake dewatering process. For this reason, it is necessary to obtain an optimal differential speed to balance the cake thickness and quality.

The characteristic above all affects the clarity of the liquid output which is dependent on the volumetric throughout rate, where a higher flow rate will result in a poor liquid clarity. Another characteristic that influences the clarity of the liquid output is the differential speed. A low differential speed results in a better clarity, therefore, aiding in the separation process. The G-Force also plays a role in the clarity of the liquid discharge. Higher G-force results in an increase in the separation of the solid particles from the liquid and yields a better clarity.
 

Fish oil separation centrifuge surimi separation equipment fish oil extraction decanter centrifuge

Hydrolysis is the enzymatic disintegration of proteins located in muscles or other tissues. Typical raw products are by-products and residuals from fish processing. ENZYMATIC HYDROLYSIS Another process is the production of fish oil and fish meal from fresh material which is not used for filleting or canning but is used for food or animal feed. Typical examples for use in human consumption are elab- orated fish products or additives such as fish soup, fish sauces, flavors, energy drinks, etc
The separation into fish oil, stick water and protein-rich solids is performed in one to three stages, depending on the raw
material and the desired purity of the final products. In the first stage there is always a decanter centrifuge. Optionally the
oil can be separated further using a disk stack centrifuge for higher purity. Another option is a second clari- fication via the
centrifuge to separate the fine solids from the stick water in order to reduce its viscosity for a higher concentration as well as to reduce fouling inside the evaporator.

 

 

Advantages :

1. Lower cake transportation costs due to very dry solids
2. Better recovery of nutrients due to very high separation efficiency
3. Lower fresh water consumption compared to other processes
4. Continuous and fully automatic operation
5. 24 h operating reliability
6. Optimum wear protection
7. Energy saving design
8. Easy to operate
9. Easy to maintain
10. Simple assembly/dismantling

Features:
* All parts coming into contact with the product are made of stainless steel.
* 3-phase AC motor for controlled torque starting via frequency converter
* Approximately 80 to 90 % of the oil is recovered.
* Low personnel costs due to continuous and automatic operation.
* Highest g-force for higher solids output
* Adjustable bowl speed via VFD
* Automatic adjustment of differential speed via VFD
* Two motor drive
* Belts for both primary motor and secondary motor

Specification

 

Model	Diameter	Length	Max Speed (R/Min)	L/D Ratio	G-Force (G)	Capacity	Main Motor Power	Weight	Dimension (L*W*H)
	(Mm)	(Mm)				(M3/H)	(Kw)	(Kg)	(Mm)
LWS355*1160	355	1160	3600	3.3	2576	2-8	15	1400	2470*1350*830
LWS355*1460	355	1460	3600	4	2576	2-10	15	1800	2750*1350*830
LWS450*1800	450	1800	2800	4	1976	4-25	37	2500	3320*1700*1130
LWS500*2000	500	2000	2500	4	1750	5-35	45	4000	3520*1800*1170
LWS520*2080	520	2080	3200	4	3154	3-35	55	5000	4510*1410*1170
LWS550*2000	550	2000	2800	4	2414	6-40	55	5700	4570*1380*1600
LWS650*1950	650	1950	2200	3	1761	6-45	75	5000	4840*1510*1720
LWS650*2600	650	2600	2000	4	1456	6-65	90	6000	5490-1510*1720

Company Profile

 

 

 

 

 

Shenzhou Centrifuge has been developing and manufacturing centrifuges for nearly 80 years, and is one of the Chinese leading manufacturer. Shenzhou Centrifuge has more experience and expertise than any other separator manufacturer when it comes to applying and using decanter centrifuge for the purpose of continuous separation.

Packing & Delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Recommend Products

 

 

Customer Photos

 

 

FAQ

1. who are we?
We are based in Zhejiang, China, start from 1980 sell to South America(12.00%),Southeast Asia(10.00%),Northern Europe(10.00%),Southern Europe(10.00%),Domestic Market(10.00%),South Asia(8.00%),Central America(6.00%),North America(5.00%),Eastern Europe(5.00%),Africa(5.00%),Oceania(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Mid East(4.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Centrifuge,Separator,Packing machine,Drying machine,Filling & Sealing machine
4. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,AUD,HKD,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English and Chinese.