Vertical Tubular Centrifuge for The Clarification of Dye Stuffs

• After-sales Service: Field Installation, Commissioning and Training
• Warranty: 1 Year
• Type: Centrifuge
• Object: Cosmetic
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Tube Centrifuge
• Condition: New
• Showroom Location: None
• Material: Stainless Steel
• Weight: 550
• Warranty of Core Components: 1 Year
• Video Outgoing-Inspection: Provided
• Marketing Type: Hot Product 2019
• Core Components: PLC, Motor
• Key Selling Points: Easy to Operate
• Voltage: 380V
• Power: 2.2kw
• Machinery Test Report: Provided
• Trademark: SHENZHOU
• Origin: China
• Production Capacity: 1000 Set/Sets Per Year

Product Description

Product Description

Vertical Tubular Centrifuge for The Clarification of dye stuffs

HIGH-SPEED TUBULAR SEPARATOR

Possessing superiority in high separation factor, high output, small footprint and convenient operation, the High-speed Tubular Separator is an ideal centrifugal equipment to be mainly used in liquid - solid or liquid - liquid - solid separation in
biomedicine, health food, beverage, chemical industry and other industries. It is an ideal equipment for centrifugal separation at present. The minimum separation particle is 1 microns, which is more suitable for extraction, concentration and clarification to liquid- solid materials with small difference in gravity and solid of small particle size and low content, strong corrosive medium and other materials.
Tubular Separator is also a kind of fine separation equipment, which is suitable for the suspension with small quantity of solid, and the dissoluble liquid separation with small difference in gravity. Utilizing the centrifugal force to drive the materials of different proportion in loaded stress, thought separation can be achieved. Basic on the function of the tube separator, the tube separator is divided into two kinds of separation type, clarified tubular separator (GQ) for liquid-solid separation, and separating pipe separator (GF) for liquid (light liquid) - liquid (heavy liquid) -small amount of solid separation.

Working principle of Tubular Separator
Consist of the machine cover, driving device, drum, liquid catch tray, the liquid inlet and bearing seat, this separator with high running speed, belongs to sedimentation separator. The upper drum is a flexible shaft, while the lower is damping floating bearing. The main shaft is connected by a coupling buffer and a passive wheel. Motor transmit power from the transmission belt and tension wheel to passive wheel, to drive the drum rotate around its own axis with high-speed, and thus form a strong centrifugal force field. All the materials are fed from liquid inlet under the bottom, and flow upward along the drum wall by centrifugal force fluid. During this process, the dense liquid phase forms the outer ring, and the small liquid phase forms the inner ring, which separately flow to respective liquid outlet mounted on the upper drum.
When the thickness of the sediment affect the liquid phase clarification or the capacity of the rated slag weight in the drum, the dregs of the drum wall should be removed manually after the shutdown.

Application

Tubular Separator is mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.

Product Paramenters

Model	GQ/G57	GQ/GF80	GQ/GF105	GQ/GF125	GQ/GF150
ID(mm)	57	80	105	125	150
Height(mm)	240	450	730	730	730
Sedimentiaion volume(L)	0.38	2.67	6	8	10
Max speed(R/min)	30000	21000	19000	17500	16000
G-force	28500	22500	21000	19000	18000
Inlet nozzle diameter(mm)	2/2.5/3	3/4	4/6/8/10	6/8/10	8/10/12
Material inlet pressure(Mpa)	≥0.05	≥0.05	≥0.05	≥0.05	≥0.05
Capactiy(L/H)	267	670	1600	2200	3200
Motor model	High speed DC motor	3phase two pole motor	3phase two pole motor	3phase two pole motor	3phase two pole motor
Power(KW)	0.55	1.5	2.2	3.0	3.0
Dimension(mm)	310*280*530	500*700*1300	600*1000*1600	600*1000*1600	600*1000*1600
Machine weight(Kg)	80	300	490	510	530

Main Characteristics

1. The unique design of interior blade is more suitable for the isolation of the fermentation bacteria than the conventional
tubular separators. Equipped with reverse stop device, the residual mother liquid can be retained completely without loss once the
machine stop.
2.With advantages of high separation factor and strong separation ability, It is applicable to separate and clarify the materials
which is difficult to separate by ordinary centrifuge and all kinds of emulsion liquid such as transformer oil, lubricating oil,
fuel oil, turbine oil, grease, dyes, and saponification separation and so on.
3.Simple structure in linear type ,easy in installation and maintation.
4.Adopting advanced world famous brand components in bearing parts, electric parts and operation parts.
5.Running in a high automatization and intellectualization,no pollution
6.Simple to set up, use and clean for minimal down-time between separations
7. No replacement membranes or costly disposables
8.3-phase electric motors provide power for rapid acceleration and quieter operation.
9.Small footprint.

Details Images

Points for Operating the Tubular Separator
* When the percentage of impurities or solids in the liquid is less than 0.5%, the ideal separation effect will be realized. If
the percentage is higher than 0.5%, the solution should be clarified first
* High groove is used to feed materials. If the liquid is of large viscosity, it can also be pumped.
* Measurement for proper materials inlet pressure: when materials are fed by the nozzle into the separator, the proper inlet pressure is depended on property of materials the nozzle into the separator,to spray materials at least half up onto the drum.
Low pressure will cause part of the liquid not fed into drum and slide into the bearing seat at the bottom of the drum to
outflow from overflow mouth, while the high pressure will affect the separation quality and lead to the vibration of the
machine.
* The inside diameter of feeding tube shall be large enough to be controlled by valve and be convenient for user to adjust
according to flow rate and output.
* The separator is equipped with nozzle in different diameter, to fit different the separation quality and yield.If small
production with high quality, the small nozzle is used, and vice versa.

Suggestion from SHENZHOU
Earned high reputation and good feedback from global customer among all of our products, High-speed Tubular Separator is capable of applied in a variety of biological processes from cell harvesting and clarify to separation of chemical, food, blood.
High performance is consistently achieved in continuous, semi-continuous or batch operations. Include a range of sizes from research to production, our tubular separator provide an efficient and cost-effective technology to separate from one to several thousand liters of biological cultures and other mixtures. For extremely high solids concentrations, drum centrifuge for high performance separations can be supplied.

Recommend Products

Disc stack centrifuge

Horizontal decanter centrifuge

Tubular bowl separator

 

Company Profile

Shenzhou Machinery Co.,Ltd, We are the professional manufacturer of centrifuge machinery, separation equipment,
food machinery, Liquid Filling Machine and packing machine. specializing in provide with the whole set of technology and
equipment. we have professional technology team to design, research and development for customer according to customer's requirements, and have high standard production process control. Our international trade department can supply the whole project service. Our main area are the food and centrifuge project. Our aim is providing you efficiently solution and superior after-service. We sincerely hope YOU are our next customers! Exported country:At present, our products have been exported to the United States, Belgium, Canada, Australia, Greece, Bolivia, Peru, Saint Lucia, Israel, Malaysia, Indonesia, Philippines, Sri Lanka, Vietnam, South Korea, India, Denmark, Russia, Georgia, Jordan, Bangladeshi, Tailand, Ethiopia, Finland, Spain, Japan, Colombia, Romania and so on more than 50 countries.

PRODUCT PACKAGING

FAQ

1. What certificates do you have?
We can provide CE, ISO 9001, etc

2. What is the warranty period of the equipment?
Normally 1 year warranty.

3. Can we visit your factory?
Of course, we sincerely invite you to visit, If it's not convenient for you to come to our factory, you can also visit by
telephone video conference.

4. What's payment you accept?
A4: T/T, Western Union, L/C, Ali Pay, etc

5. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.