High Performance 3 Phase Decanter Centrifuge, Three-Phase Separation Centrifuge for Fish Oil Processing

• Customization: Available
• Warranty: 1 Year
• Type: Centrifuge
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Condition: New
• Separation: 2phase Separation
• Feature: High Efficiency
• Warranty of Core Components: More Than 5 Years
• Name: Decanter Centrifuge
• Key Selling Points: Famous Brand PLC
• Discharge Type: Self-Cleaning
• Motor: ABB
• Weight: 1050
• Bowl Material: Stainless Steel 304/316L/Duplex Steel
• Core Components: PLC, Motor
• Application: Oil Extraction
• Transport Package: Wooden Case
• Trademark: Shenzhou
• Origin: Zhejiang, China

Product Description

Product Description

High Performance 3 Phase Decanter Centrifuge , Tricanter Centrifuge For Fish Oil Processing

The 3-phase decanter separates which contains oil into an oil phase, solids and virtually oilfree waste water. Because of its high dry matter, the solids can be recycled relatively easily.

In addition, the solids concentration in the waste water is lower than would be the case if nozzle separators are used in
conventional process.

Decanter centrifuges process characteristics
The separation process in a decanter centrifuge relies on a few process characteristics such as centrifugal force or G-force, sedimentation rate and separating factor, differential speed between the conveyor and bowl, and clarity of the liquid discharge.Decanter centrifuges require a centrifugal force for the separation of the solids from the liquid. This characteristic is dependent on the radius of the centrifuge and its angular rotational speed. A decanter centrifuge applies a force equivalent to several thousand G's, which reduces the settling time of the particles. It is also favored to maintain a large G-force, which will result in an improved separation.
The rate at which sedimentation occurs is an important characteristic of the decanter centrifuge separation process. The
sedimentation rate is influenced by the particle size, the shapes of the particles, their differential densities and the viscosity between the particles and the liquid. This process characteristic can be improved by utilizing flocculating agents. The sedimentation rate is also dependent on the separating factor of the decanter centrifuge, which is related to the centrifugal force.
The exterior bowl and the scroll conveyor rotate at different high speeds. This differential speed between the two is accountable for the sedimentation throughout the decanter centrifuge cylinder. A high differential speed results in a smaller residence time of the cake settlement, so it is necessary to keep the cake thickness to a minimum to avoid impairing the discharge quality.
Keeping the cake thickness to a minimum also aids in the improvement of the cake dewatering process. For this reason, it is necessary to obtain an optimal differential speed to balance the cake thickness and quality.
The characteristic above all affects the clarity of the liquid output which is dependent on the volumetric throughout rate, where a higher flow rate will result in a poor liquid clarity. Another characteristic that influences the clarity of the liquid output is the differential speed. A low differential speed results in a better clarity, therefore, aiding in the separation process. The G-Force also plays a role in the clarity of the liquid discharge. Higher G-force results in an increase in the separation of the solid particles from the liquid and yields a better clarity.

Advantages :

1. Lower cake transportation costs due to very dry solids
2. Better recovery of nutrients due to very high separation efficiency
3. Lower fresh water consumption compared to other processes
4. Continuous and fully automatic operation
5. 24 h operating reliability
6. Optimum wear protection
7. Energy saving design
8. Easy to operate
9. Easy to maintain
10. Simple assembly/dismantling

Features:
* All parts coming into contact with the product are made of stainless steel.
* 3-phase AC motor for controlled torque starting via frequency converter
* Approximately 80 to 90 % of the oil is recovered.
* Low personnel costs due to continuous and automatic operation.
* Highest g-force for higher solids output
* Adjustable bowl speed via VFD
* Automatic adjustment of differential speed via VFD
* Two motor drive
* Belts for both primary motor and secondary motor

Specification

Model	Drum diameter mm	Inlet liquid capacity/h	Power of main/auxiliary motor Kw	Weight Kg	Dimension (max) mm
LW250	250	1-4	11/4	1200	2650*720*900
LW(F)250	250	1-4	11/4	1200	2650*720*900
LW250(W)	250	1~5	11/4	1300	2750*720*900
LW350	350	5~15	22/5.5	2000	3585*980*1238
LW(F)350	350	5~15	22/5.5	2000	3585*980*1238
LW350(W)	350	5~18	15/5.5	2200	3412*1090*950
LW(S)350	350	2~10	22/5.5	2000	3676*980*1238
LW450	450	5~20	30/11	3000	4380*1080*1360
LW(F)450	450	5~20	30/11	3000	4380*1080*1360
LW450(W)	450	5~28	30/11	3200	4380*1080*1360
LW(S)450	450	5~15	37/11	3200	4195*1080*1360

Packing & Delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Company Profile

 

 

 

Shenzhou Centrifuge has been developing and manufacturing centrifuges for nearly 80 years, and is one of the Chinese leading manufacturer. Shenzhou Centrifuge has more experience and expertise than any other separator manufacturer when it comes to applying and using decanter centrifuge for the purpose of continuous separation.

Recommend Products