China Prefered Manufacturer Supplier of Mini Laboratory Decanter Centrifuge

• After-sales Service: Oversea Support
• Warranty: 1 Year
• Type: Centrifuge
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 150
• Object: Cosmetic
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Distillation Equipment Type: Essential Oil Distillation Equipment
• Pressure: Low Pressure
• Condition: New
• Keyword: Dewatering Centrifuge
• Application: Solid Liquid Separation
• Operation: 24 Hours Automatic Continuous Operation
• Material: Material
• Key Selling Points: Easy to Operate
• Motor/ Inverter: ABB
• Weight: 380 Kgs
• Drum Diameter: 150mm
• Capacity: 50-600 L/H
• Voltage: 380V/Customized
• Max Speed: 5500r/Min
• Power: 4.0/2.0kw
• Transport Package: Exported Wood Case
• Specification: 126x125x65cm
• Trademark: Shenzhou
• Origin: Zhejiang, China
• HS Code: 8421192000
• Production Capacity: 10000 Set/Sets Per Year
• Package Size: 126.00cm * 125.00cm * 65.00cm
• Package Gross Weight: 380.000kg

Product Description

 

LW150 Mini Laboratory Decanter Centrifuge is designed for two phase separation in the laboratory. It is mainly used for small batch continuous processing operations from 5L/H to 500L/H.

The input and output is far less than that required by industrial centrifuge.It is a separation equipment for research and scientific research institutions and small batch direct output. biological industries

Working Principle

Working Principle :

Horizontal screw centrifuge is an equipment that uses the principle of centrifugal sedimentation to separate suspension. Its working principle is that when the suspension to be separated enters the drum of the centrifuge, the solid particles with higher density than the liquid phase will quickly settle to the inner wall of the drum under the centrifugal force of the drum. The screw conveyor inside the centrifuge pushes the solid phase deposited on the inner wall of the drum to the drying area at the small end of the drum for further dehydration, and then discharged through the slag outlet, and the separated clear liquid will flow out of the overflow weir at the large end of the drum.

 

Product Features

Product Features: 

1. Good Adaptability. In the design, various special requirements of small separation application and treatment process are fully considered, and the optimization design of main functional components such as specificity and adjustability is implemented. Before purchasing the machine, the user needs to explain the installation and use place, the physical and chemical characteristics of the treated materials, process requirements, etc.
2. Strong Production Capacity. Continuous 24-hour operation, speed block and good separation effect;
3. Low Labor Cost. Fully automatic operation, reliable operation, no manual intervention.
4. Long service life. No less than 8000 hours of trouble free operation under normal operating co nditions; And the service life shall not be less than 8 years.
5. Compact Structure. Small floor area, easy operation, convenient maintenance and low maintenance cost;
6. The Safety Protection Devices Are Complete And Reliable. With multiple protections such as torque protection, power control, electrical interlocking and audible and visual alarm, it can effectively eliminate or reduce the damage caused by sudden faults to the machine.

 

 

• Applications: high quality laboratory materials with flow less than 300L / H
• Material: 304L,316L
   
• Standard Configuration: ordinary motor and standard control cabinet Color type: Customizable
   
• Optional configuration: explosion-proof motor, power supply voltage, frequency converter

Mini Laboratory Decanter Centrifuge 

 

Technical Parameters

Model	Drum Diameter (Mm)	Max Speed (R/Min)	Capacity (L / H)	Ratio (L To D Ratio)	Motor Power (Kw)	Separation Factor (G)	Weight (Kg)	Size L X W X H(Mm)
LW150	150	5500	50-600	4.33	4	2621	380	1260*1250*650

 

 

•  Clean appearance 
•  No more odour problems
•  Easy to install and operating equipment
•  Small footprint
•  Operate for different sludge types
•  Operating for thickening or dewatering
•  Reduced labour costs
•  More process flexibility and higher levels of performance

 

Best Service for You

1) 7day*24hours Hot-line & Email Service.
2) Your inquiry related to our products or prices will be replied in 24hours.
3) Well-trained and experienced staffs to answer all your questions in fluent English.
4) Abundant spare parts in stock are available to provide.
5) Our technicians could be dispatched for overseas service.
6) Your workers could get trained in our factory.

Service Commitment

1. We will provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

2. Consultant services for whole machine life, 24 hours technical support by email and telephone.

3. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

 

 

Drum

The drum is cast by Duplex 304 stainless steel in centrifugal casting, the forging process is adopted , which can enhance its corrosion resistance, The replaceable alloy sleeve is installed in the solid state outlet, so that the mother material of the drum's outlet is not worn, and the wear-resistant bar is installed in the drum to make the drum inside not worn.

Differential

The differential drives the screw discharger and makes it rotate at a constant speed of the external drum. The speed difference between the external drum and the screw discharger is determined by the reduction ratio of the differentialand the speed of the external drum.

 

PLC Control Panel

The electrical control adopts the double conversion auto control system, which can display the parameters such as frequency, rotation speed, differential speed and current of operating major and auxiliary electrical engine.  

 

Eletrical Components: SIEMENS/S-chneider/ABB  

Cemented carbide and wear sleeve 

 

 

Imported Bearling-NSK

 

Imported Bearing-SKF

 

Certificate

Company Profile

Jinhua Shenzhou Centrifuge has been developing and manufacturing centrifuges for more than 40 years, and is one of the Chinese leading manufacturer. Shenzhou Centrifuge has more experience and expertise than any other separator manufacturer when it comes to applying and using decanter centrifuge for the purpose of continuous separation. 

 

Main production: LW series decanter centrifuge, SZ series sludge dewatering press, LWS three-phase centrifuge, centrifugal dehydrator, integrated sludge thickening and dewatering machine.

The company has a quality assurance system and after-sales service assurance system. It is a technical enterprise integrating scientific research, design, manufacturing, sales and service. 

At present, the equipment is exported to 70 countries, including the United States, Canada, Australia, Russia, Brazil and Singapore.

Packing&Shipping

 

 

FAQ

1. Q : Are you a manufacturer or the trading company ?

    A: Yes,  we're one of the earliest professional manufacturer for the solid-liquid centrifugal Separator equipments in china 

2.  Q:Do you have OEM service? Do you supply the parts?
     A: Yes, we do, as long as you provide us your drawing and detailed requirements.

3. Q: How can we easily find out the most fit centrifuges?
    A: We have experienced engineer team to help you make the model selection, as long as you provide us the detailed processing
         material characteristics.

4. Q: Will you dispatch technicians for installation and commissioning?
    A: Yes, we can, we do lots of service, please refer to our after sales part.

5. Q: What is your advantage compared with your competitors?
    A: Quality and experience. We are the top centrifuge supplier in China, our designs and structures are similar to world leader's
         brand.

6. Q: How do you protect the quality?
    A: My factory is a state owned enterprise with more than 40 years experience, strict operation policy is performed, advanced
        processing machines guarantee the precision of all components, workers with operation license, parts get multiprocessing,
        transmission&electrical parts are of international famous brand. Series of test and inspection are done in the whole producing
        stage.

7. Q: Can we visit your end user or contact them ?
    A: Yes,users are in domestic and abroad, we can provide you the name list. You can go there or contact to get more info. 

 

If you need to know more information for our contrifugal equipment, please free feel to get a contact with Yonit :

Supplier's Information: 
 

Jinhua Shen Zhou Centrifuge Co.,Ltd

 

Addrs : No.188 Shuxi Road, Wucheng District 321017
Jinhua City, Zhejiang

Province, China

Contacter : Yonit Tang