New Design High Speed Centrifuge 22 Inch 2 Phase Decanter Centrifuge

• Customization: Available
• After-sales Service: Oversea Support
• Warranty: 1 Year
• Model NO.: 550
• Type: Centrifuge
• Object: Cosmetic
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Distillation Equipment Type: Essential Oil Distillation Equipment
• Pressure: Low Pressure
• Condition: New
• Keyword: Dewatering Centrifuge
• Application: Solid Liquid Separation
• Operation: 24 Hours Automatic Continuous Operation
• Material: Material
• Key Selling Points: Easy to Operate
• Motor/ Inverter: ABB
• Weight: 3100 Kgs
• Drum Diameter: 550mm
• Capacity: 5-35 M3/H
• Voltage: 380V/Customized
• Max Speed: 3200r/Min
• Power: 55/22kw
• Transport Package: Exported Wood Case
• Specification: 195x130x70cm
• Trademark: Shenzhou
• Origin: Zhejiang, China
• HS Code: 8421192000
• Production Capacity: 10000 Set/Sets Per Year
• Package Size: 338.50cm * 135.00cm * 160.00cm
• Package Gross Weight: 3500.000kg

Product Description

The Shenzhou 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. Shenzhou 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components, with either ABB or SIEMENS brand variable frequency drive units. Electronic load sensing and feed pump control permit automatic optimization of the feed rate, bowl speed, and differential conveyor speed. Direct readouts of the bowl RPM, motor loads and bearing temperatures relayed (Optional) directly to the control panel allow the operator full and continuous equipment optimization.

 

 ?

The feed product is pumped into the decanter centrifuges through the inlet. Feed goes into a horizontal bowl, which rotates. The bowl has is composed of a cylindrical part and a conical part. The separation takes place in the cylindrical part of the bowl. The fast rotation generates centrifugal forces up to 4000 x g. Under these forces, the solid particles with higher density are collected and compacted on the wall of the bowl. A scroll (also screw or screw conveyor) rotates inside the bowl at a slightly different speed. This speed difference is called the differential speed. This way the scroll is transporting the settled particles along the cylindrical part of the bowl and up to the end conical part of the bowl. At the smallest end of the conical part of the bowl, the dewatered solids leave the bowl via discharge opening. The clarified liquid leaves through a paring disc (internal centripetal pump).

 Application:

 

Tunnel Boring Project Mud Cleaning

Dredging Slurry Separation

Industry Waste Water Treatment.

Drilling Fluids Solids Control

Oil Recovery from Marine Slop

Oil Sludge Treatment

Municipal Sewage Sludge in Purification Plants

Mining Industry Separation.

 

Features:

 

• Waste water treatment
• food processing
• Petrochemical
• Petroleum
• Waste recycling
• Fish processing
• Chemicals
• Beneficiation
• Organic Chemicals
• Polymer industry
• Inorganic chemical industry

High Speed Centrifuge

 

Technical Parameters

Model	LW550X1650-N	LW550X2200-N
Bowl Diameter	550 mm / 22 in	550 mm / 22 in
Bowl Length	1650 mm / 65 in	2200 mm / 87 in
Capacity	5-35 m³/h	5-40 m³/h
Max Bowl Speed	3200 rpm	3000RPM
Typical Bowl Speed	2500 rpm	2300 rpm
Max G Force	3154	2772
Main Drive Motor	55 kW	55 kW
Back Drive motor	22 kW	22 kW
Dimensions	3885 x 1350 x 1600 mm / 153 x 53 x 63 in	4150 x 1350 x 1600 mm / 163 x 53 x 63 in
Weight	3100 Kg	4200 Kg
Remarks	Above Max capacity is for water, the treating capacity would be various as per different material conditions and customer required treating results.
The above specification and parameters for reference only.

 

 

•  Clean appearance 
•  No more odour problems
•  Easy to install and operating equipment
•  Small footprint
•  Operate for different sludge types
•  Operating for thickening or dewatering
•  Reduced labour costs
•  More process flexibility and higher levels of performance

 

Best Service for You

1) 7day*24hours Hot-line & Email Service.
2) Your inquiry related to our products or prices will be replied in 24hours.
3) Well-trained and experienced staffs to answer all your questions in fluent English.
4) Abundant spare parts in stock are available to provide.
5) Our technicians could be dispatched for overseas service.
6) Your workers could get trained in our factory.

Service Commitment

1. We will provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

2. Consultant services for whole machine life, 24 hours technical support by email and telephone.

3. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

 

 

Drum

The drum is cast by Duplex 304 stainless steel in centrifugal casting, the forging process is adopted , which can enhance its corrosion resistance, The replaceable alloy sleeve is installed in the solid state outlet, so that the mother material of the drum's outlet is not worn, and the wear-resistant bar is installed in the drum to make the drum inside not worn.

Differential

The differential drives the screw discharger and makes it rotate at a constant speed of the external drum. The speed difference between the external drum and the screw discharger is determined by the reduction ratio of the differentialand the speed of the external drum.

 

PLC Control Panel

The electrical control adopts the double conversion auto control system, which can display the parameters such as frequency, rotation speed, differential speed and current of operating major and auxiliary electrical engine.  

 

Eletrical Components: SIEMENS/S-chneider/ABB  

Cemented carbide and wear sleeve 

 

 

Imported Bearling-NSK

 

Imported Bearing-SKF

 

Certificate

Company Profile

Jinhua Shenzhou Centrifuge has been developing and manufacturing centrifuges for more than 40 years, and is one of the Chinese leading manufacturer. Shenzhou Centrifuge has more experience and expertise than any other separator manufacturer when it comes to applying and using decanter centrifuge for the purpose of continuous separation. 

 

Main production: LW series decanter centrifuge, SZ series sludge dewatering press, LWS three-phase centrifuge, centrifugal dehydrator, integrated sludge thickening and dewatering machine.

The company has a quality assurance system and after-sales service assurance system. It is a technical enterprise integrating scientific research, design, manufacturing, sales and service. 

At present, the equipment is exported to 70 countries, including the United States, Canada, Australia, Russia, Brazil and Singapore.

Packing&Shipping

 

 

FAQ

1. Q : Are you a manufacturer or the trading company ?

    A: Yes,  we're one of the earliest professional manufacturer for the solid-liquid centrifugal Separator equipments in china 

2.  Q:Do you have OEM service? Do you supply the parts?
     A: Yes, we do, as long as you provide us your drawing and detailed requirements.

3. Q: How can we easily find out the most fit centrifuges?
    A: We have experienced engineer team to help you make the model selection, as long as you provide us the detailed processing
         material characteristics.

4. Q: Will you dispatch technicians for installation and commissioning?
    A: Yes, we can, we do lots of service, please refer to our after sales part.

5. Q: What is your advantage compared with your competitors?
    A: Quality and experience. We are the top centrifuge supplier in China, our designs and structures are similar to world leader's
         brand.

6. Q: How do you protect the quality?
    A: My factory is a state owned enterprise with more than 40 years experience, strict operation policy is performed, advanced
        processing machines guarantee the precision of all components, workers with operation license, parts get multiprocessing,
        transmission&electrical parts are of international famous brand. Series of test and inspection are done in the whole producing
        stage.

7. Q: Can we visit your end user or contact them ?
    A: Yes,users are in domestic and abroad, we can provide you the name list. You can go there or contact to get more info. 

 

If you need to know more information for our contrifugal equipment, please free feel to get a contact with Yonit :

Supplier's Information: 
 

Jinhua Shen Zhou Centrifuge Co.,Ltd

 

Addrs : No.188 Shuxi Road, Wucheng District 321017
Jinhua City, Zhejiang

Province, China

Contacter : Yonit Tang