| Customization: | Available |
|---|---|
| After-sales Service: | Field Installation, Commissioning and Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1) Sludge Feeding System
2) Polymer Make-up System
3) Thickening and Dewatering system
4) Solid Conveying System
5) Electric Control System of Complete Set
We configure different electric control system for different customer needs:
1) Simple Type: Able to control automatically during operation
2) General Type: Have PLC control
3) Intelligent Type: PLC+PC Control, have data sampling and output
Main Characters of Our Sludge Dewatering Centrifuge with Bigger Length/Diameter Ratio
1)Length/Diameter Ratio L/D≥4.3.High rotating speed and low differential speed system is adopted. Bigger length to diameter ratio increases the resident time of the mixture inside the bowl so that the time for liquid clarifying and solid dewatering is prolonged. High rotation speed generates great centrifugal force. Small differential speed reduces the stirring of screw to the solid. With the increased residence time, good efficiency for dewatering the sludge and clarifying the centrate is achieved. Comparing with typical decanter centrifuges, drier solid cake and clearer centrate is produced by this kind of machine.
2)Big torque hydraulic backdrive is adopted. This provides bigger drive torque. (If the size is the same, the drive torque of hydraulic backdrive is 2 to 4 times of that of mechanical gearbox.)
3)Hydraulic differential speed system is adopted. The output torque is greater (≥16000Nm). The differential speed changes with the load. The differential speed is adjusted automatically through feedback. The discharge power is automatically compensated. In this way, the solid inside the bowl is compacted under the centrifugal force. Moreover, The solid is extruded between the screw blades in the conical section of the bowl. In this way, the discharged solid maintains a invariable dryness and the solid is more dryer. When solid is discharged out of the bowl , the differential speed automatically comes back to its original value. The solid bowl is almost free of clogging. If the throughput is the same, 30% chemical and electricity consumption can be saved by using our decanter. The noise is lower than 84dB.
4)Wide adjustment range of starting differential speed: the differential speed is adjusted within the range from 0 to 20 rpm.
5)Super hard abrasive-resistant material W2C-65% is spay welded on solid discharge port, feed port and conveyor blade. The thickness if 2~3mm. Comparing to tiles, it has better duration and needs no replacement. This prolongs the operation life.
Working Principle of High Dryness Decanter
Working Procedure
High dryness decanter can use limit space to fit together different stages of separation.
Mixing and Accelerating Stage
Sludge and chemical mixes in the specially designed feed chamber and accelerates together. This prepares the sludge for best separation.
Clarifying Stage
The flocculants sediments inside the bowl under centrifugal force, the clear liquid flows out of the weir at the end of the bowl.
Pressing Stage
Conveyor pushes the solid toward the discharge end. The sludge is further pressed by centrifugal force and the water comes out of the small holes of the sludge.
Double-direction Pressing Stage
In the conical part of the bowl wall, the sludge is pressed by specially designed double direction pressing effect. The specially designed conveyor produces axial pressing force and water comes out of the tiny holes of the sludge.
Control the Staying Time of Solid
In order to achieve best dewatering effect when flow rate or character of sludge changes, the solid content inside the bowl should be continuously controlled.This is controlled by the drive system of the conveyor. The drive system of the conveyor can measure real-time the solid content inside the bowl and adjust automatically, solid discharge torque automatically compensated.
Drive Technology
The reliable and excellent operation needs good cooperation of bowl drive and conveyor drive. Shanghai Centrifuge Institute researches good drive combination, which can be recommended as best design to suit different applications.
Bowl Drive System
Alternatives includes: - AC Motor + Frequency Converter
- AC Motor + Hydraulic Coupling
- Other Special Ways
Conveyor Drive System
Alternatives includes:
Frequency converter back of forward drive
DVF multi-level planet control
Hydraulic motor with individual hydraulic pump
Notes:
1.Actual capacity depends on character of mixture and treatment requirement.
2.Maximum solid discharge capacity is calculated assuming that the differential speed is 10r/min and the sludge is pressed in two directions.
3.Sludge feed concentration range is 0.5~0.6%.
4.Parts contacting the mixture are made from AISI321 or AISI316 stainless steel.
Use Of Decanter Centrifuge
1. Chemical field: Decanter centrifuges can be used for separation, concentration, drying and other processes in the chemical field. For example, it can be used for the separation of polymers, the recovery of organic solvents and so on.
2. Pharmaceutical field: Decanter centrifuges are often used in various separation operations in drug production. For example, it can be used for the separation, purification and concentration of drug extract.
3. Food field: Decanter centrifuges are also widely used in the field of food processing, such as the separation of egg white, honey extraction, orange juice extraction, dairy product concentration, etc.
4. Environmental protection: decanter centrifuges can be used in various wastewater treatment and waste recycling fields. For example, it can be used for sludge dewatering, solid waste treatment, etc.
How To Choose Decanter Centrifuge ?
Before choosing a decanter, consider the following factors:
1. The nature and characteristics of the processing materials;
2. The amount and load of processing;
3. Equipment reliability and maintenance costs;
4. Equipment cost and operating expenses.
How To Maintain Decanter Centrifuge ?
In order to ensure the long-term stable operation of decanter centrifuge, it is necessary to regularly maintain and maintain the equipment. The following points should be noted:
1. Replace lubricating oil and bearings regularly;
2. Regularly check the wires and electrical components of the equipment;
3. Avoid equipment motor overheating, overload and frequent start;
4. Timely repair and replace the damaged parts of the equipment;
5. Clean the inside and shell of the equipment regularly to keep the equipment clean.
Notes:
1.Actual capacity is related to character of mixture and treatment requirement.
2.Maximum solid discharge capacity is calculated assuming that the differential speed is 10r/min and the sludge is pressed in two directions.
3.Sludge feed concentration range is 0.5~0.6%.
4.Bowl material of above centrifuges is AISI329 stainless steel (centrifugally cast). Parts contacting the mixture are made from AISI321 or AISI316 stainless steel.
here are three types of the control system of Shenzhou sludge dewatering complete equipment.
1)Simple Control System
This kind of control system is composed of ordinary electric components. It can operate separation machine system, feed system, chemical adding and throwing system automatically / manually. It can also monitor operation of main equipments, alarm troubles and is protected by interlink. This system can meet the need to control complete set for single machine.
2)PLC Control System
It is well-known that PLC is widely used in industrial auto control system, because of its stable operation, resistance to disturbing, safety operation, easy configuration and software programming. SCI developed PLC Control System for sludge dewatering complete to fit for the complicated treatment and high requirements from sludge dewatering. It can automatically adjust the differential speed and feed flow rate. This control system is highly automated. It can operate the factory without human. It can display many specifications and has more than 30 kinds of trouble monitoring, alarming and protecting functions for equipment operation. This will make the whole working system safer and more reliable.
3)PLC Controller + PLC Control System
The above-mentioned PLC Control system can communicate with the central control room PC through network by means of communication interface to on-site PC or network communication system demanded by customer.
1) Able to control automatically as above-mentioned PLC control system;
2) Able to monitor dynamically the sludge dewatering on the PC screen, the working conditions of all the equipments and other related specifications are displayed as figures;
3) Able to draw the history trend curve of specifications;
4) Able to display and print report form for a day, a month or a year;
5) The on-site PC and central control upstream computer can monitor the working status of several sets of sludge dewatering equipments. It can also remote control the starting or stopping of each sludge dewatering set.
6) To avoid unauthorized person from entering the system, it has setting functions in three levels.
Paramters:
1. who are we?
We are based in Zhejiang, China, start from 1980 sell to South America(12.00%),Southeast Asia(10.00%),Northern Europe(10.00%),Southern Europe(10.00%),Domestic Market(10.00%),South Asia(8.00%),Central America(6.00%),North America(5.00%),Eastern Europe(5.00%),Africa(5.00%),Oceania(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Mid East(4.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Centrifuge,Separator,Packing machine,Drying machine,Filling & Sealing machine
4. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,AUD,HKD,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English and Chinese.
){kind=link}