High Speed Atomizer for Spray Dryer Olive Oil Pulp Separation Decanter Separator

• Customization: Available
• Warranty: 1 Year
• Type: Centrifuge
• Object: Cosmetic
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Condition: New
• Dimension(L*W*H): 4510*1410*1170mm
• Operation: Easy /Automatical Continuous
• Warranty of Core Components: 1 Year
• Name: 3 Phase Decanter Centrifuge
• Key Selling Points: High Productivity
• Capacity: 6-40m3/H
• Differential Speed: 3~35rpm
• Material: 304/316L Stainless Steel
• Weight: 5000
• Certification: CE ISO9001
• Product Type: Liquid-Liquid-Solid Separation
• Drum Diameter: 520mm
• Application: Liquid Liquid Solid Separation
• Power: Main Motor: 55kw/ Uxiliary Motor 15kw
• Max Speed: 3200rpm
• Trademark: Shenzhou
• Origin: Zhejiang, China
• Production Capacity: 300 Set/Sets Per Year

Product Description

Product Description

Olive oil decanter centrifuge

It applies to carry out separating liquid and solid of the suspensions material which weight thickness of solid phase ≤ 10% (or volume concentration of ≤ 50% after settlement24 hours) and equivalent diameter of solid-phase particle ≥ 0.005 ~ 2 mm, liquid-solid density difference ≥ 0.05 g / cm 3, such as calcium carbonate, calcium sulfate, polyvinyl chloride, lees, bean dregs, soy protein, paper pulp, vegetable oil and palm oil, kaolin, white mud, sludge from environmental protection industry and also
applies to various types of chemical products which use settlement centrifugal separation principle, these material all can be carried out effectively.

Difference speed between outside drum and screw conveyor depends on the speed of the transmission ratio of differential and its rotation speed.Decanter centrifuge is a mechanical equipment which utilize the principle of centrifugal and sedimentation and can carry out continual separate the suspend liquid with density difference.

 

.* MOC:Stainless steel
* Scroll discharge
* PLC control
* Big working capacity
* Continuous operation

 

WORKING PRINCIPLE

The material(crude palm oil) passing through the center feeding pipe into the centrifuge (axid feed). Under the action of centrifugal force and material pressure,it passes through the distributor distributed to the drum. The dense solid phase is deposited on the drum wall, and is transported to the drum body cone by auger delivery then falls from the discharge port to the
solid collector box.At the same time, the relatively light liquid phase(processed palm oil) is not moving with the spiral because of its fluidity, but through the outlet overflow into the liquid aggregate box.

Technical parameter

Drum Diameter (mm)	Drum Speed (rpm)	G - Forceg	Capacity (m3/h)	Primary Motor (KW)	Differential Speed (rpm)	Weight (Kg)	Dimension (mm)
520mm	3200	3154	4~60	55	3~35	5000	4510*1410*1170mm

Packaging & Shipping

Products packaging

Shipping

Product configuration

Components 1

Components 2

Components 3

Advantage

1. Lower cake transportation costs due to very dry solids
2. Better recovery of nutrients due to very high separation efficiency
3. Lower fresh water consumption compared to other processes
4. Continuous and fully automatic operation
5. 24hr operating reliability
6. Optimum wear protection
7. Energy saving design
8. Easy to operate
9. Easy to maintain
10. Simple assembly/dismantling

Following allocation could be available to meet customer's demand:
1. Frequency conversion plus PLC controlling system
2. Protection system for vibration and temperature rising
3. Feeding speed control
4. Gas-liquid separation device on liquid outlet
5. Other allocation demand

 

 

Main Characteristics

Features

* All parts coming into contact with the product are made of stainless steel.

* 3-phase AC motor for controlled torque starting via frequency converter
* Approximately 80 to 90 % of the oil is recovered.
* Low personnel costs due to continuous and automatic operation.
* Highest g-force for higher solids output
* Adjustable bowl speed via VFD
* Automatic adjustment of differential speed via VFD
* Two motor drive
* Belts for both primary motor and secondary motorFeatures
* All parts coming into contact with the product are made of stainless steel.
* 3-phase AC motor for controlled torque starting via frequency converter
* Approximately 80 to 90 % of the oil is recovered.
* Low personnel costs due to continuous and automatic operation.
* Highest g-force for higher solids output
* Adjustable bowl speed via VFD
* Automatic adjustment of differential speed via VFD
* Two motor drive
* Belts for both primary motor and secondary motor

Customer photos

Application

Areas of application for 3 phase decanters
3 phase decanters (respectively separation decanters) are used for the clarification and simultaneous separation of fluids of different densities.The three phase decanters perform a 3 phase separation (solid-liquid-liquid separation) of dispersions of solid material and two non-mixable liquids of different densities.
 

Typical areas of application for 3-phase are thus
* Treatment of sludges containing oil
* Separation of oil-water emulsions contaminated by solid materials
* Extraction of animal and plant oils and fat
* Furthermore * Fish press water from the fishmeal industry
* Manufacturing starch
* Olive oil

Functional and constructional characteristics of 3-phase decanters
Due to the high rotational speed of the drum solid material particles are deposited on the inner wall of the drum; at the same time the two liquids are separated from each other. The solid material particles spun off to the outside are continuously transported to the solid material discharge by the integrated screw conveyor. The two liquid phases, separated from each other and almost completely free of solid material, overlay each other according to their density and leave the separation chamber by separate openings at the opposite end of the drum (cylindrical drum end). The two liquid phases can either be discharged freely (e.g. over a weir) or under pressure (by means of an integrated pump; peeling plate also called gripper).

Main Choices

According to user's requirement, the product contact parts can be made of austenite stainless( 321, 316L…. ),Haynes alloy, titanic alloy or other anti-erosion materials.